Scan Options Dialog
Used to present saved scan criteria and add new elements to the grid. MapIndex supports text elements, text nodes, and flexi-text. The initial location of text elements selected by the scanner can be adjusted depending on the type of map being scanned. When text is placed in a DGN along a curved element, each character is placed as a separate text element. Only the graphic group number can be used to determine that each of the letters make up part of a single string.
Opens when clicking on the Scan Locations button in the Edit Grid dialog.
Setting | Description |
---|---|
Level |
Selects only elements on the specified level. |
Height |
Selects only elements with the specified text height. |
Colour |
Selects only elements with the specified colour. |
Match |
Enables you to identify an existing text element to set the values of the Level, Height, and Colour options. |
Use Fence |
Specifies to use a fence. Clip fence modes are not supported. |
Fence Mode |
Specifies how to use the fence. |
Type |
Sets the initial origin.
|
Join like graphic groups |
Causes the scanner to automatically join text elements that have the same graphic group number, if on. There is no indication in the design file as to the order of the characters, thus the scanner has to attempt to recalculate the original string. If characters are incorrectly joined, they can be split and rejoined in the correct order using Check Locations. |
Clear Location |
Clears the locations of previous scans. |
Scan |
Starts the scanner. |
OK |
Exists the dialog. |
Cancel |
Cancels the operation. |